The Industrial Universal Truss Mount for projectors is attached directly to the truss. The specified length refers to the distance between the lower edge of the crossbeam to the perforated plate. This bracket can be attached to all common trusses and tubes in a very short time. After rigging, the projector can be adjusted using two separate axes. Unlike the widely used ball joints, this allows for a more accurate setup of the projection. This design reduces subsequent corrections due to keystone distortion / the keystonet. In many cases, this results in better projections. Due to the large span of the mount (see graphic) and the nominal load of up to 25kg, the Industrial Universal Truss Mount is especially suitable for large projectors. We have specially designed the Industrial universal truss mount for projector for frequent use. The eyebolts for adjusting the beamer fit snugly in the hand and can be tightened very much with a lever (e.g. screwdriver) for heavy loads. Other modules for the Industrial Universal Mount: You can retrofit the mount with all our fixed and variable extension tubes.
In addition, we also offer the projector mount with a self-hanging pipe clamp (price information on request).
The Industrial Universal Truss Mount is suitable for professional use at stage events such as theaters, trade shows or concerts. Whether the dimensions of your projector are suitable for the use of the universal mount, you can find in the operating instructions and the graphic overview.